SE36:/S01/M01/D01
From Metabolonote
Sample Set Information
| ID | SE36 |
|---|---|
| Title | Jatropha curcas leaf metabolite analysis |
| Description | Investigation of Jatropha curcas leaf metabolites. 3 replicates data are examined for each sample. |
| Authors | Yukiko Nakamura, Takeshi Ara, Takashi Matsuura, Mitsuo Enomoto, Nozomu Sakurai, Hideyuki Suzuki, Daisuke Shibata, Kazusa DNA Research Institute |
| Reference | Direct Submittion |
| Comment | version 1 |
Sample Information
| ID | S01 |
|---|---|
| Title | Jatropha curcas Leaf |
| Organism - Scientific Name | Jatropha curcas |
| Organism - ID | NCBI taxonomy:180498 |
| Compound - ID | |
| Compound - Source | |
| Preparation | Jatropha curcas plants are grown on pots filled by soil under natural conditions. Plants are grown at room temperature with natural light condition in winter. Leaves are harvested at spring of 2008. |
| Sample Preparation Details ID | |
| Comment |
Analytical Method Information
| ID | M01 |
|---|---|
| Title | LC-FTICR-MS, ESI Positive analysis |
| Method Details ID | MS1 |
| Sample Amount | 6.7mg |
| Comment | [MassBase ID] MDLC1_12989 |
The raw (binary) and near-raw (text) files of this analysis are available at MassBase.
Analytical Method Details Information
| ID | MS1 |
|---|---|
| Title | LC-FT-ICR-MS ESI positive method 1 |
| Instrument | Agilent1100 HPLC (Agilent), LTQ-FT (Thermo Fisher Scientific) |
| Instrument Type | LC-FTICR-MS |
| Ionization | ESI |
| Ion Mode | Positive |
| Description | Harvested sample is frozen by liquid N2 and resulting powder (100mg) are solved in 300uL 80% methanol solution. 20uL sample is injected into HPLC after 0.2um membrane filter treatment. HPLC conditions: Agilent 1100 series (Agilent), Column: TSKgel-100V (4.6 x 250 mm, 5 micrometer; TOSOH), Solvent: A; 0.1% formic acid aq. B; ACN (addition 0.1% formic acid fc.), Gradient: (B);3 to 30% (0.0 to 25.0 min), 30 to 90% (25.1 to 40.0 min), 90% (40.1 to 45.0 min), 95% (45.1 to 50.0 min), 3% (50.1 to 57.0 min), Column temp.: 40 degree C, Flow rate=0.5mL/min, PDA: 200-650 nm (2 nm step). FT-ICR-MS conditions: Filter 1: FTMS + c norm !corona !pi res=100000 o(200.0-1500.0); 2: ITMS + c norm !corona !pi Dep MS/MS Most intense ion from (1); 3: ITMS + c norm !corona !pi Dep MS/MS 2nd most intense ion from (1), Rejected mass=224.1900, 225.1930, 235.1700, 236.1830, 266.2300, 267.2330, 294.2600, 295.2630, 378.0400, 380.0300, 609.4000, 610.2900, 810.4200, 811.4100, 1123.6700, 1124.6830, 1125.6800. |
| Comment_of_details |
Data Analysis Information
| ID | D01 |
|---|---|
| Title | PowerGet data analysis for KomicMarket2 |
| Data Analysis Details ID | DS1 |
| Recommended decimal places of m/z | 6|ITMS 2 |
| Comment |
Data Analysis Details Information
| ID | DS1 |
|---|---|
| Title | PowerGet analysis for detection of all peaks (B3) |
| Description | Raw data files are converted to text file by MSGet software without cut off value and peaks are extracted from the text files by PowerFT with parameters (intensity cut off=5000, peak selection filter is default, intensity cut off in peak assignment=1000). The replicates data are aligned by PowerMatch with blank data. The alignment is manually edited. Assigned peaks observed in multiple replicate samples are selected for annotation process. |
| Comment_of_details |
